Welcome to the official website of HUJI hardware!中文版
SPECIALIZED IN CONSTRUCTION ANCHORS
AND HARDWARE STAMPING PARTS
GERMAN CRAFT, EUROPEAN QUALITY, SHANGHAI FACTORY,
EXPERT OF HARDWARE FASTENERS

 HOTLINE:+86-21-63636994

Position:PRODUCT > ANCHOR > C.S. SERIES > Flat Head Sleeve Anchor

Sleeve Anchor with Flat Head Bolt

Flat Head Sleeve Anchor

Sleeve anchor with flat head bolt, also named hexagen sleeve anchor, is a medium-load anchor bolt. This product has the characteristics of small drilling hole, large tension, almost little exposed out of suface of wall after installation, convenient demolition.It's widely used in various decoration occasions, such as door and window frame, equipment feet, transportation facilities, etc. Many specifications in gernal and special sizes can also be customized as required.

Product Details

Use & Characteristics

☑ Fixing air conditioning, water heater, range hood, etc.

☑ Fixing unframed balcony window, anti-theft doors and Windows, kitchen, bathroom components, etc.

☑ Ceiling wire rod fixed -combined with casing and cone cap.

☑ Fixing wood or marble stair handrail, curtain wall, bracket, etc.

☑ As ground anchors of various transportation facilities such as speed bumps, limit posts, etc.

Material and Craft

◇ Bolt: General carbon steel bolt, regularly is DIN933 cut edge hexagon head bolt, other head types can also be customized. the standard thread of bolt should be full thread, however, the longer sizes are mostly half thread.

head types

◇ Sleeve: SPCC carbon steel roll, cut into band, made by continuous die. There're many hole types of sleeve, the round and long holes that are more common, and special holes can also be customized as required.

hole types

◇ Nut: CS1008A wire, forged by duplex machine, it has Raytheon in the conical part.

◇ Washer: Conventional with DIN125 washer, can also be selected larger washer, sunk-head type is generally not equipped with washer.

◇ Surface Treatment: Galvanized in gernal.

Tension

Correctly fixed on C30 concrete block, and the damage limit shoul not be less than the allowable load of the same specification standard bolt.

For example: M10 series, recommended vertical design allowable tension load should be less than 6000N.

Sketch

M8 series sketch

Specifications

No. Size Weight Drill Dia. Thread Frame Tkn. Active Len. Min Drill Dpt.
No. mm kg/Mpcs Φ mm mm mm mm mm
1 M6×45 18 Φ8 M6 25 45 20
2 M6×60 21 Φ8 M6 40 60 20
3 M6×80 24 Φ8 M6 60 80 20
4 M8x55 33 Φ10 M8 25 55 30
5 M8×70 40 Φ10 M8 40 70 30
6 M8×80 45 Φ10 M8 50 80 30
7 M8×100 54 Φ10 M8 80 100 30
8 M8×120 63 Φ10 M8 100 120 30
9 M8×150 77 Φ10 M8 120 150 30
10 M10×65 57 Φ12 M10 25 65 40
11 M10×80 73 Φ12 M10 40 80 40
12 M10×100 85 Φ12 M10 60 100 40
13 M10×130 102 Φ12 M10 90 130 40
14 M10×150 117 Φ12 M10 110 150 40
15 M10×180 126 Φ12 M10 140 180 40
16 M12×80 105 Φ16 M12 30 80 50
17 M12×100 128 Φ16 M12 50 100 50
18 M12×120 152 Φ16 M12 70 120 50
19 M12×150 196 Φ16 M12 100 150 50
20 M12×180 237 Φ16 M12 130 180 50
21 M12×200 274 Φ16 M12 150 200 50
22 M16×100 173 Φ20 M16 40 100 60
23 M16×120 238 Φ20 M16 60 120 60
24 M16×150 308 Φ20 M16 90 150 60
25 M16×180 388 Φ20 M16 120 180 60
26 M16×200 453 Φ20 M16 140 200 60
27 M16×250 660 Φ20 M16 190 250 60
28 M16×300 893 Φ20 M16 240 300 60
29 M20×150 660 Φ24 M20 70 150 80
30 M20×200 1150 Φ24 M20 120 200 80
31 M20×250 1630 Φ24 M20 170 250 80
32 M20×300 2140 Φ24 M20 220 300 80

Note: Sizes in bove table are all in stock, other sizes also can be customized. Please call us for more details.

Tag:FNSA
Online Service
CONTACTS

Cell Phone

+86-18916559929

Service Time

24h * 365d

Telephone

+86-21-63636994

WeChat QR-code
SERVICE